|
| |
 |
| |
Aigner
|
01DISTETER: 221 254 000
193 |
The
universal electronic measuring and adjusting instrument with
microprocessor and digital display. This offers a wide
application range; it provides fast and accurate measuring
of:
-the set height and depth tools
-the thickness of work pieces as well as
-the depth of slits and profiles and recesses in work pieces.
--comes in a wooden box
|
 |
| |
|
02AUXILIARY FENCE: 211 123
000 193 |
Hinged
auxiliary fence for surface planning machines. This is for
flatting narrow work pieces safely is always at hand when
needed - simply swung into position, no annoying mounting
and dismounting.
-with mounting plates, screws, Allen wrench, single-ended
wrench
|
 |
| |
|
03EDGING FENCE: 211 136
000 193 |
For the safe
guidance of work pieces when edging on the surface planning
machine. This presses the work piece against the fence and
protects your hands.
|
 |
| |
|
04MOUNTING RAIL 250MM: 212
102 000 191 |
.
|
 |
| |
|
05MOUNTING RAIL 330MM: 212
103 000 191 |
The
universal element for Aigner safety and working units.
The Aigner mounting rail is suitable for all table sizes as
it is available in 4 different lengths. It provides fast and
safe mounting of safety and working units without any
additional tools.
|
|
| |
|
06MOUNTING RAIL 430MM: 212
104 000 191 |
The
universal element for Aigner safety and working units.
The Aigner mounting rail is suitable for all table sizes as
it is available in 4 different lengths. It provides fast and
safe mounting of safety and working units without any
additional tools.
|
 |
| |
|
07MOUNTING RAIL 530MM: 212
105 000 191 |
The
universal element for Aigner safety and working units.
The Aigner mounting rail is suitable for all table sizes as
it is available in 4 different lengths. It provides fast and
safe mounting of safety and working units without any
additional tools.
|
 |
| |
|
08MOUNTING RAIL 830MM: 212
108 000 191 |
The
universal element for Aigner safety and working units.
The Aigner mounting rail is suitable for all table sizes as
it is available in 4 different lengths. It provides fast and
safe mounting of safety and working units without any
additional tools.
|
 |
| |
|
08aMOUNTING RAIL V - Right:
212 113 000 192 |
| The
universal basic element on spindle milling machines with
integrated sliding table for supporting safety and working
units. The mounting rail V is continuously adjustable
without any additional tool.
Mounting rail V (I)
for the right-hand of the machine.
|
 |
| |
|
08bMOUNTING RAIL V - Left:
212 114 000 192 |
| The
universal basic element on spindle milling machines with
integrated sliding table for supporting safety and working
units. The mounting rail V is continuously adjustable
without any additional tool.
Mounting rail V (I)
for the left-hand of the machine.
|
 |
| |
|
09TABLE EXTENSION WITHOUT
MOUNTING RAIL: 212 112 000 192 |
Table
extension with optimal back-stroke protection when insertion
moulding.
The Aigner table extension is a must for insertion moulding.
It replaces one helper when tooling long work pieces.
Additionally, it supports further units as for instance the
CirQuick.
-without mounting rail
-without cross stop
|
 |
| |
|
10TABLE EXTENSION WITHOUT
MOUNTING RAIL: 214 113 000 192 |
Table
extension with optimal back-stroke protection when insertion
moulding.
The Aigner table extension is a must for insertion moulding.
It replaces one helper when tooling long work pieces.
Additionally, it supports further units as for instance the
Cirquick.
-complete with mounting rail
-length: 530 mm
with cross stop
|
 |
| |
|
11TABLE EXTENSION COMPLETE WITH
MOUNTING RAIL: 214 114 000 192 |
Table
extension with optimal back-stroke protection when insertion
moulding.
The Aigner table extension is a must for insertion moulding.
It replaces one helper when tooling long work pieces.
Additionally, it supports further units as for instance the
CirQuick.
-without mounting rail
-with cross stop
|
 |
| |
|
12CLIP: 212 123 000 173 |
To store the
cross stop at the machine Easy to mount at the leg of the
table extension
Easy to mount at the leg of the table extension
.
|
 |
| |
|
13COUPLING BAR: 212 126
000 173 |
For a safe
coupling of Aigner table extensions. To machine extra long
work pieces, the Aigner table extensions can be coupled in
succession by means of Aigner coupling bars. An additional
table extension may be clamped firmly to the mounted
coupling bar within seconds.
-with screws and Allen wrench
|
 |
| |
|
14CIRQUICK: 212 132 000
192 |
The handy
help when sawing or milling circles. Easiest handling - no
tracing, no reworking is necessary when sawing or milling
exact bows or disks. The Aigner CirQuick may be installed on
any band saw or moulding machine (running clockwise or
counter-clockwise).
consisting of:
1 guide
2 guide pins
2 support strips
1 special wrench
1 Allen wrench
|
 |
| |
|
14aANGLE BRACKET: 212 143
000 173 |
| Angle
Bracket The supporting element for fixing pressure modules
on machine tables.
The angle bracket can be fastened with socket head cap
screws on machine tables or, by means of said screws and
nuts, in T-slots.
|
 |
| |
|
14bNUT: 212 154 000 173 |
| For screwing
the angle bracket in T-slots of machine table and slides.
|
 |
| |
|
18QUICKER: 212 205 000 193 |
Universally
applicable at all sliding woods, changeable in no time at
all.
The Quicker may be fixed with a simple pressing of the lever
anywhere at the sliding wood using its overall width.
Place Quicker at the required spot on the sliding wood.
When pressing the lever to the front, the front tips clutch
into the sliding wood from above and, simultaneously, pull
the rear tips into the front end of the sliding wood.
|
 |
| |
|
18aSPACER: 212 282 000 193 |
|
Indispensable equipment to all feed unites. The spacer
protects feed unit rollers, milling tool and milling fence
against damage.
|
 |
| |
|
19MOUNTING PLATE: 214 103
000 173 |
-1 set (2 pieces)
|
 |
| |
|
20SUPPORTING RAIL: 214 108
000 193 |
Important
equipment to the
BowmouldMaster. The Aigner supporting rail serves to fix
the pressure module for safe guidance of the work piece, for
example with double wheel.
incl. 2 locking screws
Allen wrench
|
 |
| |
|
21SUPPORTING RAIL: 214 105
000 193 |
An
appropriate unit to be added to the
integral fence. For example the Aigner support rail is
used to hold the pressure module with double wheel for
guidance of the work piece.
-incl. 2 stud bolts
-Allen wrench
|
 |
| |
|
22VARIOFENCE: 214 119 000
192 |
The safe
cross stop for insertion moulding at spindle moulding
machines with long tables. The Aigner Variofence is
necessary as cross stop when insertion mouling at spindle
moulding machines with long tables. In connection with the
Aigner
table extension it provides accurate scale and risk less
working.
|
 |
| |
|
23INTEGRAL FENCE BOTH SIDES
500MM: 214 223 000 193 |
An excellent
working unit with revolutionary features of safe and
accurate scale moulding at spindle moulding machines. At
conventional moulding stops, the opening in the tool area is
always problematic. This provides a guiding area without any
gap. Well-devised constructional features mark its universal
possibilities of use for all moulding works. Mounting and
adjusting can be done quickly and simply without additional
tools. Exact adapting to tool diameter and height possible.
Guide-webs, integrated, loss proof guaranteeing continuous
guiding area.
each half 500 mm long
|
 |
| |
|
24INTEGRAL FENCE LEFT SIDE
500MM, RIGHT SIDE 650MM: 214 234 000 193 |
An excellent
working unit with revolutionary features of safe and
accurate scale moulding at spindle moulding machines. At
conventional moulding stops, the opening in the tool area is
always problematic. This provides a guiding area without any
gap. Well-devised constructional features mark its universal
possibilities of use for all moulding works. Mounting and
adjusting can be done quickly and simply without additional
tools. Exact adapting to tool diameter and height possible.
Guide-webs, integrated, loss proof guaranteeing continuous
guiding area.
left half 500 mm long
right half 650 mm long
|
 |
| |
|
25INTEGRAL FENCE BOTH SIDES
650MM: 214 243 000 193 |
An excellent
working unit with revolutionary features of safe and
accurate scale moulding at spindle moulding machines. At
conventional moulding stops, the opening in the tool area is
always problematic. This provides a guiding area without any
gap. Well-devised constructional features mark its universal
possibilities of use for all moulding works. Mounting and
adjusting can be done quickly and simply without additional
tools. Exact adapting to tool diameter and height possible.
Guide-webs, integrated, loss proof guaranteeing continuous
guiding area.
each half 650 mm long
|
 |
| |
|
26FILLING BAR FOR INTEGRAL
FENCE: 214 251 000 173 |
Safe
guidance of thin work pieces at the
integral fence. The Aigner filling bar fills the lower
recess in the left case of the integral fence; it offers a
continuous surface for guidance in this are also. Surface
with hard-coat layer.
|
 |
| |
|
27SPREADER FOR INTEGRAL FENCE:
214 252 000 173 |
Indispensable when moulding easily tilting work pieces at the
integral fence. The Aigner spreader is clamped at the
desired level into a groove of the
integral fence.
-with Allen wrench
|
 |
| |
|
28CUTTER FRAME E: 214 263
000 193 |
As support
when milling curved work pieces with undercut profile at the
fence.
-with Allen wrench
|
 |
| |
|
28aFLATSERVER: 214 267 000
193 |
| Absolutely
necessary, in particular for flattening small work pieces.
The Flatserver ensures a precise and safe flattening of
work pieces when milling them on one or both surfaces, both
with a milling tool running above or below. It may be
mounted quickly and safely to the integral fence. Its
continuous fine adjustment is provided by the cases in the
integral fence without any additional tool.
|
 |
| |
|
28aKANTIX: 214 264 000 193 |
| Practical
help when milling protruding rims of work pieces. The
Kantix may be quickly mounted at the desired height to the
integral fence. Its continuous fine adjustment is
provided by the cases in the
integral fence. The surface is hardened by anodic
treatment.
|
 |
| |
|
28bFLUSHFIX: 214 265 000
192 |
Ideal
work piece support for the flush moulding of edges. It may be
mounted easily, upright or flat, without tools to the
mounting rail or the
integral fence or the
mounting plates and is then infinitely adjustable to the
work piece breadth. It ensures exact flush moulding of edges
of all kind and provides full use of the cutting breadth of
the tool. The surface is hardened by anodic treatment.
|
 |
| |
|
29GLASSLEDGER: 214 268 000
192 |
To remove
safety glass ledges out of frame timbers. This is simply
clamped between the fence halves. The supplied spacer forks
level different breadths of frame timbers.
|
 |
| |
|
30CLAMP STRIP: 214 283 000
193 |
For an
efficient and safe insertion moulding of short work pieces.
The clamp strip enables risk less and efficient working. It
serves for accident prevention especially when it is used in
connection with the Aigner
table extension for the insertion moulding of short
work pieces.
|
 |
| |
|
31CONTERMAX: 214 287 000
293 |
For precise
and fast profiling of work pieces on the length side of a
work piece. The contermax enables a safe and economical job.
The precise guiding of the work piece guarantees a very high
accuracy. Quick change of work pieces due to newly developed
clamping method.
- Aluminum execution
- Length: 420mm
- Clamping length: 200mm
- Long and robust, synthetic-coated aluminum handle for safe
operation
|
 |
| |
|
32 CUTTER FRAME D: 214 322
000 193 |
Serves as
support when moulding work pieces curved on several surface
planes at the
BowmouldMulti.
|
 |
| |
|
33BRACKET: 214 323 000 193 |
As support
for the Aigner pressure module at the
BowmouldMulti. The bracket enables the vertical use of
the Aigner double wheel when moulding work pieces curved on
several surface planes (double frame moulding).
|
 |
| |
|
34BOWMOULDMULTI: 214 324
000 192 |
To mould
curved, arched, ring-shaped or similar shaped work pieces in
accurate scale. This sensible safety and working unit allows
fast and risk less moulding with feed unit of arched
work pieces. Mounting and handling of this solid construction
is as easy as can be. This can be mounted to any spindle
moulding machine fast and with no tools at all. It mill
clockwise or counter-clockwise.
incl. 2 curved moulding stops, 2 protective hoods
|
 |
| |
|
35EXHAUST UNIT: 214 327
000 192 |
Provides a
chip and dust free workshop place. This unit is
indispensable when working with
BowmouldMulti and during special working processes.
|
 |
| |
|
36CURVED MOULDING STOP 30MMØ:
214 373 000 173 |
The
indispensable innovation to mould bows with the Aigner
BowmouldMaster. Simply slip it onto the cutting arbor,
no screwing to device parts is required. The height
adjustment of the moulding tool. The moulding depth can be
adjusted infinitely and precisely via the scale at the
curved moulding stop.
-incl. 2 stop plates
-for cutting arbor 30 mm
|
 |
| |
|
37CURVED MOULDING STOP 35MMØ:
214 374 000 173 |
The
indispensable innovation to mould bows with the Aigner
BowmouldMaster. Simply slip it onto the cutting arbor,
no screwing to device parts is required. The height
adjustment of the moulding tool. The moulding depth can be
adjusted infinitely and precisely via the scale at the
curved moulding stop.
-incl. 2 stop plates
-for cutting arbor 35 mm
|
 |
| |
|
38CURVED MOULDING STOP 40MMØ:
214 375 000 173 |
The
indispensable innovation to mould bows with the Aigner
BowmouldMaster. Simply slip it onto the cutting arbor,
no screwing to device parts is required. The height
adjustment of the moulding tool. The moulding depth can be
adjusted infinitely and precisely via the scale at the
curved moulding stop.
-incl. 2 stop plates
-for cutting arbor 40 mm
|
 |
| |
|
39CURVED MOULDING STOP 50MMØ:
214 376 000 173 |
The
indispensable innovation to mould bows with the Aigner
BowmouldMaster. Simply slip it onto the cutting arbor,
no screwing to device parts is required. The height
adjustment of the moulding tool. The moulding depth can be
adjusted infinitely and precisely via the scale at the
curved moulding stop.
-incl. 2 stop plates
-for cutting arbor 50 mm
|
 |
| |
|
40CURVED MOULDING STOP 1
1/4"Ø: 214 377 000 173 |
The
indispensable innovation to mould bows with the Aigner
BowmouldMaster. Simply slip it onto the cutting arbor,
no screwing to device parts is required. The height
adjustment of the moulding tool. The moulding depth can be
adjusted infinitely and precisely via the scale at the
curved moulding stop.
-incl. 2 stop plates
-for cutting arbor 1 1/4"
|
 |
| |
|
41CURVED MOULDING STOP 1
1/2"Ø: 214 378 000 173 |
The
indispensable innovation to mould bows with the Aigner
BowmouldMaster. Simply slip it onto the cutting arbor,
no screwing to device parts is required. The height
adjustment of the moulding tool. The moulding depth can be
adjusted infinitely and precisely via the scale at the
curved moulding stop.
-incl. 2 stop plates
-for cutting arbor 1 1/2"
|
|
| |
|
42BOWMOULDMASTER: 214 383
000 192 |
With
integrated dust and chop collection. To mould curved and
ring-shaped work pieces economically, safely and in accurate
scale. This safety and working unit enables fast and
risk less moulding of curved work pieces, also with feed unit.
The BowmouldMaster may easily and quickly be fixed at and
adjusted to any spindle moulding machine, no tools
necessary. It can be used for clockwise or counter-clockwise
moulding.
-suitable for tool diameters up to 220 mm with bore template
and instructions for use
|
 |
| |
|
43CUTTER FRAME: 214 385
000 193 |
|
 |
| |
|
44BOW SPRING: 214 406 000
163 |
Length: 1400
mm
|
 |
| |
|
45TINED STOPS: 214 408 000
193 |
Length: 1400
mm
-1 set
|
 |
| |
|
46PRESSURE MODULE: 214 424
000 192 |
Indispensable basic element for safe guidance of work pieces
with Aigner wheels or Aigner pressure shoe at spindle
moulding or other machines. In combination with the Aigner
single, double or twin double wheel or the Aigner pressure
shoe, the pressure module provides precise guidance of
work pieces and safe operating. The pressure is springy, the
adjustment to the work pieces fast and steady.
-with Allen wrench
|
 |
| |
|
47SINGLE WHEEL: 214 432
000 193 |
The
universally usable pressure element for precise guidance;
simple and fast insertion into the pressure module.
|
 |
| |
|
48DOUBLE WHEEL: 214 434
000 193 |
Extends the
operating range of the pressure module for frame moulding.
|
 |
| |
|
49TWIN DOUBLE WHEEL: 214
436 000 193 |
Offers
elongated guidance of the work pieces.
|
 |
| |
|
50PRESSURE SHOE: 214 438
000 193 |
Pressure
Shoe
|
 |
| |
|
50aPRESSURE SHIELD: 214
441 000 193 |
|
Indispensable element for milling works, in particular when
cutting large surface areas of small work pieces.
|
 |
| |
|
50bGUIDE WHEELS WITH 2 WHEELS:
214 443 000 193 |
| 2 wheels.
Guarantee for safe guidance, particularly of thin work
pieces.
|
 |
| |
|
50cGUIDE WHEELS WITH 4 WHEELS:
214 445 000 193 |
| 4 wheels.
Guarantee for safe guidance, particularly of thin work
pieces.
|
 |
| |
|
50dGUIDE WHEELS WITH 8 WHEELS:
214 447 000 193 |
| 8 wheels.
Guarantee for safe guidance, particularly of thin work
pieces.
|
 |
| |
|
51CENTREX: 214 455 000 192 |
Sets a new
high standard for economic and safe milling. Remarkable
features of Centrex are its solid structure, the attractive
design and its optimal position on the fence housing. Every
operation position may be quickly and easily set in next to
no time and without any tool. The special form of the
pressure shoes ensures a precise guidance of the work piece
which is visible throughout the whole operation cycle.
Pressure is applied to the work piece, also during insertion
moulding.
|
 |
| |
|
51aTHICKNESS STOP: 214 615
000 193 |
| Ideal fence
when milling work pieces to an exact thickness. The
thickness stop ensures a perfect milling of even short
work pieces without any dimple over the whole length.
Indispensable for all milling works without the
possibility of spanning both fence parts, particularly in
case of thin and small work pieces. Exact adjusting system
with microprocessor and digital display.
|
 |
| |
|
51bPRESSURE JAWS: 214 446
000 193 |
| Necessary
pressure element for milling work pieces together with the
Aigner thickness stop. The pressure jaws press the
work piece against the
thickness stop and ensure an exact and safe guidance of
the work pieces.
|
 |
| |
|
52SEGMENTER: 216 133 000
193 |
The
necessary supplement to the
CirQuick for sawing segments of a circle. Accurate
sawing of segments of a circle - without tracing, no
reworking. Exact and quick adjustment to small and large
radii by means of a scale.
Segmented
-for radii up to 1000 mm
|
 |
| |
|
53GUIDE SET: 216 135 000
193 |
The
necessary supplement to the
CirQuick for sawing segments of a circle. Accurate
sawing of segments of a circle - without tracing, no
reworking. Exact and quick adjustment to small and large
radii by means of a scale.
Guide Set
-supplementary for radii greater than 1000 mm
|
 |
| |
|
54SLIDING STICK: 216 136
000 191 |
For safe
guidance of narrow work pieces at circular saw benches or
panel saws. The Aigner sliding stick is made of wood;
therefore, it is a non-polluting and may be easily chipped;
it saves the cutters and protects your hands.
-with fixing magnets
|
 |
| |
|
54aSPLIT TOP: 216 138 000
173 |
| Ideal and
safe guidance for work pieces to be split. The Split-top
provides accurate working when splitting work pieces on
circular saw benches in one or two passes. The springy
pressure and the lateral covering of the saw disk ensure
safe working, particularly when splitting small work pieces.
|
 |
| |
|
55X-GUIDE: 216 144 000 192 |
Exact and
safe sawing without set-up time. With the X-Guide,
work pieces may be edged, divided and cross cut quickly and
without any danger.
-with suspension hook, Allen wrench
|
 |
| |
|
56SAWBOY: 216 147 000 192 |
The ideal
guide for edging
- Easy to mount at the rip fence
- Enables precise cuts according to a template
- Robust execution - Length: 670mm
- T-knob and scale for height adjustment of hold down
|
 |
| |
|
56aMORTISEBOY: 216 149 000
193 |
|
Indispensable for the efficient cutting of prongs. The
Mortiseboy may be quickly and easily mounted to the
cross feed stop of the circular saw. Split-second and exact
adjustment of the prong width are possible by means of the
clamping lever.
|
 |
| |
|
57DEFLECTOR: 216 157 000
193 |
To deflect
short work pieces and cuttings from the circular saw blade.
Two strong fixing magnets allow easy, safe and fast fixing
of the Aigner deflector at the machine table in any required
position.
|
 |
| |
|
58PROFILE ADJUSTER: 221
119 000 193 |
For precise
adjustment of moulding cutters in radial and axial
direction. Precisely adjusted moulding cutters prolong the
tool-life of the cutters, raise the quality of the work
piece
surface and improve the safety of work.
- 1 4 diameter. Further diameters (1 1/2", 25 mm, 30 mm,
35 mm, 40 mm, 50 mm) at request.
|
 |
| |
|
|
|
|
|
|
){kind=link}
){kind=link}
){kind=link}