T27 Flex tilting arbor shaper

T27 Flex Perfect results on six axes On the T27 FleX, up to six axes can be motorized and controlled. In addition to the cutting height and cutting angle, the cutting depth, the infeed jaw of the fence, the table opening, and the height setting of the feed support can be adjusted by the controller. Up to 1,000 tools and 1,000 programs can be stored in the controller. A powerful search function as well as "group" and "favorite" functions assist the operator in selecting the needed profiles. On the basic machine, the entire fence is adjusted with an easily accessible handwheel via a digital display; the infeed jaw is also adjusted with a handwheel according to a Vernier scale

Benefit from HSK technology Besides the proven MARTIN DornFix quick-change system that is used on the basic T27 machine, two versions of pneumatically clamping HSK tools are also available. The HSK system is especially suited for those who want to use their shaper as an effective supplement to their shapers or CNC processing centers. Besides HSK85 "PowerLock", we also offer the HSK63F system. Using this technology, you can easily adapt the tooling of a CNC processing center directly to the shaper, freeing up your router from time consuming traverse moulding jobs, thereby reducing bottlenecks.

Due to the four-lined standard display indicating also the compensation value for the fence, settings with tilted spindle can be done according to your drawings. Set-ups with tilted spindle are not a game of trial and error anymore. The clever splitting of the diagonal spindle movement into a vertical and a horizontal movement makes this possible.

The cutting depth can be adjusted quickly and easily according to a digital counter. The complete fence is adjusted quickly by hand wheel and the infeed jaw can be set separately by a big star grip according to a digital counter.

If required, the fence can be additionally equipped with powerful electronics which allow the direct adjustment of the cutting depth in reference with the programmed diameter of the tool. This special equipment reduces the set-up noticeably.

For ring fence work, the fence can be dismantled in an instant and remounted quickly after the job. The optional swinging support does not have to be lifted from the table but can be swung to the rear, reducing thus expensive set-up time.

To accelerate the changing of arbors and tools, the DORNFIX system, a quick arbor changing system developed by MARTIN, comes with the basic machine. The changing from a 30 to 40 mm arbor can be done within seconds. So you have the possibility to use complete tool-arbor-combinations.

More Information